Longmeida Stone Group, a stone engineering expert of the hotel and an excellent brand of Seiko Stone, collects and sorts out some commonly used professional terms in stone processing and production for you, so that you can understand more about stone knowledge comprehensively.
1. Raw material: irregular shaped stone directly separated from the mine.
2. Block material: It is made of rough materials and has six regular faces. It is used to process facing stones.
3. Stone: It is made of rough materials with certain specifications and is used for building.
4. Rough board: a board with a certain thickness cut by a circular saw, sand saw or frame saw and without any surface treatment.
5. Rough plate: plate with flat and rough surface and regular processing traces.
6. Chopping axe board: rough board processed with an axe.
7. Hammered plate: rough plate processed with a flower hammer.
8. Fired plate: rough facing plate processed with flame generated by acetylene, oxygen or propane, liquefied petroleum gas as fuel.
9. Fire and water flushing plate: a plate that is first burned and then impacted with water.
10. Water impact plate: the plate processed by water impact, the surface of the water impact plate is distributed with small holes and pits, and the natural color of the stone is basically presented.
11. Machine planed board: rough board processed by machine planed method.
12. Fine face plate: plate with flat and smooth surface.
13. Mirror plate: plate with flat surface and mirror luster.
14. Matte board: board with flat and smooth surface and low luminosity.
15. Antique stone: matt panel materials made with a series of stone grinding brushes. Some antique stones are burned first, and then polished to matt with a series of grinding brushes.
16. Sheet: sheet with thickness less than 15mm.
17. Thick plate: plate with thickness greater than 20mm.
18. Ordinary plate: square or rectangular plate.
19. Profiled sheet: non square or non rectangular sheet.
20. Natural panel material: a plate whose surface is hammered with a chisel or hammer to form a mountain surface.
21. Litchi face plate: the plate is formed by striking the surface with a hammer shaped like litchi peel.
22. Longan panel material: Use a slotted hammer to knock the stone surface in a staggered manner to form a plate like an eyelet.
23. Blind stone: a plate with concave convex stripes on the surface and installed on the blind path.
24. Machine cut plate: plate with stripe marks cut by machine.
25. Mushroom panel material: the surface is hammered with a chisel and hammer to form a plate like a undulating mountain.
26. Pineapple panel material: a plate with a surface appearance like pineapple peel.
27. Edged plate: a plate whose edge is ground into a geometric shape.
28. Table board: the board used as the table board in decoration.
29. Stair treads: used as stair treads in decoration.
30. Sand blasting plate: use carborundum as auxiliary material to spray the stone surface into a rough plate under a certain pressure.
31. Engraving board: the board with various patterns carved on the stone surface.
32. Grooving: a pit with a certain depth and width shall be cut on the plate.
33. Chicken beak: cut a 5 * 5mm L-shaped notch on the edge of the plate.
34. Bottom skimming: the process of cutting a certain angle on the bottom of the thickness direction from the long (or wide) edge of the plate.
35. Skimming: the process of cutting a certain angle on the upper surface of the thickness direction from the long (or wide) edge of the plate.
36. Small round edge: 1/4 round edge with R less than 10mm.
37. Large round edge: 1/4 round edge with R greater than 10mm.
38. Small bevel edge: bevel edge with bevel length less than 14mm.
39. Large beveled edge: beveled edge with beveled length greater than 14mm.
40. Haishang edge: it is composed of two vertical small edges and a circular edge with the middle being less than 1/4.
41. See the polished edge: the two adjacent edges shall be polished above 80 degrees.
42. French edge: It is composed of a small straight edge and a 1/4 round edge.
43. Chess edge: semicircle edge.
44. French chess piece edge: It is composed of a small straight edge and a 1/2 round edge.
45. Double level French edge: It is composed of two small straight edges and a 1/2 round edge in the middle. Or two French edges.
46. Double level chess piece edge: a semicircle edge is formed by connecting two 1/4 round edges.
47. Duck bill edge: the edge that looks like a duck bill.
48. Bare column: column whose surface is not processed by others.
49. Conical column: the plain lines on the column surface are extended into intersecting columns.
50. Cylinder: the isolines on the column surface are parallel columns.
51. Oval column: a column with elliptical cross section.
52. Spindle column: a column with a cross section shaped like a spindle.
53. Roman column: column with Roman groove on its surface.
54. Plum blossom column: the cross section shape is plum blossom petal shaped column.
55. Buttoned column: a column with thread cross section.
56. Multicolor columns: columns made of various stones.
57. Column head (column top): It is installed on the uppermost part of the column body.
58. Column waist: the part installed at the approximate waist level of the column body.
59. Column base: the part installed at the bottom of the column.
60. Handle: a small cylinder installed on the door to push and pull the door.
61. Square columns and columns with rectangular cross section.
62. Circular arc plate: bent plates with a certain radius and arc length can be spliced to form columns, elliptical columns or other columns.
63. Straight line: a spline whose extension path is a straight line.
64. Bending line: a spline whose extension track is a curve.
65. Plane straight line: the decorative surface is plane straight line.
66. Step straight line: the decorative surface is the straight line of the step.
67. Arc straight line: straight line with arc section.
68. Compound straight line: straight line composed of multiple arcs or steps in sectional shape.
69. Ceiling line: the line installed at the ceiling level.
70. Waist line: installed on the wall roughly at the waist level
The threads of.
71. Foot line: the spline installed at the ground level.
72. Corner line: the line used at the corner of the wall or the buckle of the column.
73. Door pocket line: it is installed at the doorway to form the line of door arch.
74. Handrail line: a line used as a handrail.
75. Railing line: used as the line of railing.
76. Eave line: the line installed at the eaves.
77. Window cover: it is installed at the window to form the line of window arch.
Demonstrate the noble value of natural stone and lead the healthy development of industry brands. We are willing to work with you to create a simple, environmentally friendly, healthy and warm home. For details of Longmeida stone, please consult the customer service hotline 4000-888-428.