Stone resources have been fully utilized by all walks of life in China, and more are used in the construction industry. According to different surface processing technologies, the types of facing stones produced and the suitable places for use are also different. So, what are the types of construction stone used for decoration in the market? Here, Longmeida Stone, an expert in stone engineering of the hotel, will briefly share with you:
1. Grinding
The surface is smooth and has fine luster, and different glossiness can be selected. Although the surface is smooth, it is porous. Because of the large aperture of the ground floor, penetration sealant is required. Relatively speaking, the color of the polished stone is not as bright as the polished surface.
2. Polishing
The surface is glossy, but it will lose luster and have few holes if it is not properly cured. After polishing, the reflection of the crystal will produce brilliant colors, showing the mineral particles of natural stone. The luster is from the natural reflection of the stone crystal. In production, polishing bricks and polishing powder are used to form a polished surface.
3. Burning
The surface is rough and forms at high temperature. When the stone is heated during production, the crystal bursts, so the surface is rough. The surface is porous, and penetration sealant must be used.
4. Tumble
The surface is a little rough, turning the fragments of marble, limestone or granite into antique images in the container. It is often necessary to use stone color enhancer to make the color more bright.
5. Sandblasting
Sand is sprayed onto the stone with a high-pressure jet of sand and water to form a shiny but not smooth surface.
No matter what treatment method or process is used for stone surface, the quality of the treatment process will affect the decorative effect and the stability of the use performance of the facing stone to a certain extent. Therefore, it is recommended that consumers should be careful and careful when purchasing.
Demonstrate the noble value of natural stone and lead the healthy development of industry brands. Longmeida Stone Group Consulting Hotline 4000-888-428, factory address: Shizhou Village, Chencun Avenue, Chencun Town, Shunde District, Foshan City, Guangdong Province (opposite to Shizhou Hotel).
